Digital display thermostat internal heat soldering iron 110/220V European regulation thermostat electric iron 936H digital display soldering iron

Blank
|
SKUBC0515S
$12.58 $0.00( / )
Tax included.Estoque no Brasil. Sem Risco de Taxa. Shipping calculated at checkout.
936H 6 speed numerical control electric soldering iron manual   Specifications: 1. Working voltage: AC240-200V 2. working frequency: 50-60Hz 3. heating core parameters: resistance 135Ω±15% 4. size φ3.8x60mm 5. output power: 60-80W Refers to the starting instantaneous maximum power of 120W, the average power of 60W-80W, the heat transfer power and the power of...
  • Black EU Plug
  • Black US Plug
  • Red EU Plug
  • Red US Plug
  • CN

936H 6 speed numerical control electric soldering iron manual

 

Specifications:

1. Working voltage: AC240-200V

2. working frequency: 50-60Hz

3. heating core parameters: resistance 135Ω±15%

4. size φ3.8x60mm

5. output power: 60-80W

Refers to the starting instantaneous maximum power of 120W, the average power of 60W-80W, the heat transfer power and the power of the heating core and the size of the iron head, the material and the thermal resistance of the heating core to the iron head. The output power of this soldering iron head is the same as that of the ordinary 936 welding table, and the 80W heating core power can only be reflected in the increase of the heating speed.

 

other parameters:

1. Temperature range:

C 500° C-450 ° C-400 ° C-350 ° C-300 ° C-200 °C 6 gears

F 932° F-842 ° F-752 ° F-662 ° F-572 ° F-392 °F 6 gears

2. Tinning time after power: 20-25 seconds tinning

The test environment is room temperature 30 degrees, the heating head is B head, the working voltage AC 220-240V, due to the impact of the environment, the type of heating head and other factors will have an impact of 1-30 seconds, such as changing the soldering iron head to the tool head tin time will become about 45 seconds.

3. Temperature setting step: 50°C-100 °C,  50° F-100 °F

4. Anti-static function: The national standard triangle (two corners) safety plug, effective leakage leakage, anti-static protection, to ensure that you work safe electricity.

5. Temperature calibration range :6 stops without temperature calibration function

6. Soldering iron head specifications: Compatible with 936 soldering iron, using 900M series heating head.

7. Heating core: The printed ceramic heating core is 3 times longer than the ordinary heating core.

 

Operating instructions:

 

Setting temperature operation:

1. When you press the red "+" button, the temperature increases by 50 degrees

2. When you press the white "-" key, the temperature decreases by -50 degrees

3. when the button is not pressed 3 seconds after the newly set temperature stability will be remembered, the next time the boot also maintain this temperature.

4. when the "°F" or "°C" symbol flashes, it means that the heating core temperature has not reached the set degree, and the iron head temperature can reach the set value after the heating core reaches the set temperature for about 30-50 seconds.

5. long press the red button for 3 seconds after the LCD display OFF is the shutdown state (the heating core stops heating), and then long press the red button for 3 seconds the LCD display temperature value is the heating state, and directly plug in the power state.

6. If you do not use it for a long time, please remove the power plug

 

Parameter setting:

1, in the case of no power at the same time press the red and white keys do not let go. Power on at this time, and release the red and white keys when you see the LCD display. At this point, enter the Settings menu. The LCD displays °C or °F.

2. Press the white button to select °C or °F. "°C" stands for Celsius and "°F" stands for Fahrenheit

3. Press the red and white buttons at the same time to save the Settings and launch the Settings menu.

For safety reasons, the soldering iron will stop heating in the setting state and will start heating when exiting the setting menu.

 

Fault alarm indication:

1. When EA0 is displayed on the LCD, it indicates that the heating core is disconnected.

Treatment method: a) replace the heating core. b) Check whether the heating core pin is bent and oxidized.

2. When the LCD displays "EU5" : it indicates that the power socket is in poor contact, or the power supply interferes with the soldering iron.

Treatment method: a) re-plug. b) Disable the interference source. c) Keep the device away from interference sources

 

 

Type: 

Electrical Soldering Tools

Vendor: 

Blank

Model: 

Black EU Plug, Black US Plug, Red EU Plug, Red US Plug

Ship From: 

CN

SKU: 

SKUBC0515S

  • We deliver to over 100 countries around the world. For full details of the delivery options we offer, please view our Delivery information
  • We hope you’ll love every purchase, but if you ever need to return an item you can do so within a month of receipt. For full details of how to make a return, please view our Return & Refund Policy
  • Customer Reviews

    Based on 1 review
    100%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    R
    Raquel R.

    Es una herramienta útil que llega rápidamente aunque se envíe desde China.